Symptoms: Gradual increase in Bit Error Rate (BER), reduced optical power output (Tx), decreased receiver sensitivity (Rx), complete loss of light transmission or reception. Often causes intermittent issues before total failure. Interference can originate from neighboring cells, other electronic devices, or environmental factors, leading to reduced data rates, increased latency, and overall poor network. The results of this alarms was restarting of the RF unit. After combining the RRU log analysis and the alarm of the optical module, the radio frequency maintenance link is triggered by the power-off of the RRU board, as shown in the following screenshot. This type of test has been in use for 15 years or more within the OEM industry throughout the world. Monitor DOM/DDM Data: Utilize Digital Optical Monitoring (DOM) or. Intermodulation interference is generally caused by the fact that the Intermodulation signal transmitted by nearby radio equipment falls into the frequency band received by the TD-LTE base station.
